Webster IRP 4500 Guía de instalación descargar pdf (Pagina 14)

Interactive Rear Projection (IRP)

12 INSTALLING THE IRP 4500

The tools required to assemble the keyboard tray are listed on the

Keyboard tray kit packing list and are located in the IRP 4500 toolkit

envelope shipped inside the accessory compartment on the left front

of the console.

Use the keyboard tray kit packing list and accompanying assembly

diagram to identify the parts of the keyboard tray assembly.

To assemble and install the keyboard/mouse tray:

1 Using the 5/32" allen wrench (provided), remove the two

shipping restraining bars, one on each side of the console. Keep

these bars and screws with your pallet and packing materials if

the unit will need to be reshipped.

2 Note the general arrangement and orientation of the kit parts

and determine which set of holes on the side of the console to

use for mounting the carriage and arm assembly. You can mount

Insert tray assembly into

carriage assembly as shown.

Adjust tray tension here with 3/16"

Allen wrench provided in tool kit.

Mount carriage assembly

to frame with two 10-32

screws provided.

IRP_Install_1.fm Page 12 Monday, February 3, 2003 4:19 PM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 50 51

Sin comentarios

Webster IRP 4500 Guía de instalación Pagina 14